In The Box:50 Gold Standard Glucometer (Glucose Monitoring) Strips 50 Lancets

IMPORTANT INFORMATION

Using Glucometer

Step 1. Insert the test strip into the meter to turn it on.

Step 2.Obtain a blood drop from a fingertip and apply on the strip.

Step 3.Results will appear automatically. Remove and dispose of the test strips.

Using a Lancing Device

Step1.Remove cap, insert a lancet, twist off cover and replace cap.

Step 2.Press priming button then press the yellow release button.

Step 3.Once the blood sample is obtained, remove cap and eject used lancet.

Cautions

• Check and prepare you kit including meter, test strip, lancing device etc.
• Wash and dry your hands before you begin the testing.
• Gear up the lancing device with a new lancet.
• Warm up your hands by rubbing or washing with warm water for a better blood flow.
• Prick your finger with the lancing device at the sides of the finger as there are less nerve ending here than at the tips.
• Keep switching your finger to prevent thickening of the skin.
• Avoid using your little finger due to the skin being thin.
• Be careful not to smear the drop.
• Gently touch the blood drop with the test strip in the meter, wait a few seconds for result to appear.
• Record the result and dispose of the test strip into a sharps bin.
• If you still have any further queries please speak to our customer support team.

Note:

• Only a small amount of blood (0.5 l) is needed for checking the blood sugar level.
• Use the test strips of the Dr Trust. The strips of other brands not always be the compatible with the meter.
• A sugar testing strip is one-time use only.